RectorSeal LLC, Houston, a manufacturer and distributor of quality HVAC/R products, has introduced the Rooftop Pipe Support (RPS), a sturdy, easy-to-install system for presenting an organized, aesthetic alternative to wood blocks and other unprofessional jerry-rigged methods. The RPS is designed for mounting HVAC/R, electrical, plumbing and condensate piping, or ductwork, walkway grates and solar panels on commercial flat rooftops without roof penetration. The RPS is a .15-inch-thick (3.8-mm) ultraviolet light-stabilized, weather-resistant copolymer shell with a high density foam core that provides insulation, vibration isolation and roof membrane protection. The 7.5 (W) x 8 (L) x 5-inch (H) (19 x 20 x 12-cm) RPS weighs only .78-lb (354-grams), but can withstand load capacities of up to 250-lbs or 350-lbs each when used with universal strut channel. The RPS is the industry’s only rooftop support system that has five numbered slots to keep two-inch and smaller pipe aligned and organized during installation, although it can accommodate larger pipe diameters. The top of the RPS’s 7.5 x 2-inch (19 x 5-cm) shell accommodates multiple pipes and its surface-gripping slots prevent pipe roll and movement during installation. Additional pipe runs can be supported above the shell top via a universal strut channel elevated by 1/2-inch (12-mm) threaded rod. Each RPS has dedicated holes leading to a molded hexagonal receiver for friction-fitting 5/8-inch and 3/4-inch (19-mm) nuts that eliminate the need for a hold-back wrench when fastening threaded rods or bolts. Each RPS unit includes a 3/4-inch (W) x 9-inch (L) (2 x 22-cm) galvanized perforated strap that secures up to one two-inch-diameter pipe. Multiple pipe runs are limited to only roof space, because each RPS can be interlocked laterally with the shell’s molded tabs that easily snap into a neighboring RPS’ receiver tab. Other RPS features are:

Steel Grating, Platform Grating, Steel Grate Grill, Plain Bar Grating - Hongchang,https://www.hc-steelgrating.com/